Stellite 13 Alloy

Stellite 13 was designed for good general resistance to wear, erosion, and oxidation. Stellite 13 is used in a range of applications where a strong balance of wear and corrosion properties are required while also retaining good ductility and machinability. It has improved corrosion resistance relative to Stellite grades such as Stellite 6, Stellite 12 and Stellite 3.

Nominal Composition
Base: Co
Cr: 28
W: 20
Ni: 5.0
C: 0.9
Others: V, Fe, Si, Mn

Hardness HRC: 45-50

Typical UTS: 790 MPa

UNS: Not Listed

AMS:  Not listed